KFI35 Optical Fiber 800-1700nm Portable Live Fiber Detector Cable Identifier Hot

Description

Feature:
1. With proper clamp head, clamp the measured optical fiber (bare or tail) tightly into the test area, and then turn on for testing.
2. Portable style, without interrupting optical fibers, can distinguish the direction and frequency of light.
3. Adopt the "one‑key‑through" operation mode to make the operation simple and convenient. Can identify three commonly used signal frequencies, namely 2KHz, 1KHz, 270Hz.
4. Relative optical power in digital display optical fiber. Provide appropriate adapters for bare fibers and various tail fibers.
5. The KFI‑35 optical fiber identifier is a tool for optical fiber maintenance that is often needed during maintenance, installation, wiring and restoration.
6. For non‑destructive fiber identification, it can find and separate a specific fiber under the detection situation of any position of single‑mode and multi‑mode fiber.
7. By injecting the 1310 or 1550 optical signal with a specific modulation signal into the optical fiber at one end, and using the recognizer to identify it on the line, it can also indicate the service.
Specification:
Item Type: Optical Fiber Identifier
Material: Aluminium Alloy
Color: As shown in the picture
Recognizable Signal Type: 2kHZ, 1kHZ, 270HZ
Sensitivity Range: +10-50 dBm
Wavelength Range: 800-1700nm
Fiber Category: 0.9nm, 0.25nm, 2.0nm, 3.0nm
Battery Type: 9V alkaline battery(Not included)
How to Use
With proper clamp head, clamp the measured optical fiber (bare or tail) tightly into the test area, and then turn on for testing.
Package List:
1 x Optical Fiber Identifier(Battery Not Included)
2 x Clamp
1 x Storage Bag
1 x Instruction Manual
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
On Apr-23-21 at 04:49:04 PDT, seller added the following information: