-40%
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4

3/4" x 30" Eldorado M-75 1041 Gun Drilling Machine

$ 14520

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Drill Travel: 4.00 in
  • Condition: The Eldorado is a good runner and can be inspected under power on our floor.
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Swing: 30.00 in

    Description

    Maximum Drilling Diameter
    0.75 inches
    Minimum Drilling Diameter
    0.055 inches
    Maximum Drilling Depth
    30 inches
    Spindle Speeds
    725 - 5860 RPM
    Drilling Feed Rate
    .1 - 99.9 RPM
    Rapid Feedrate
    200 IPM
    Work Table
    22" x 22"
    Height of Spindle Centerline
    8 inches
    Straightness per 12"
    0.001 inches
    Maximum Coolant Pressure
    1500 PSI
    Reservoir Capacity
    60 gallons
    EQUIPPED WITH
    Motor Driven With 2 HP 1725 RPM, 3 Phase, 60 Cycle, 460 Volt Spindle Drive. 4-Speed Lima Gear Box. 7.5 HP, 3 Phase, 60 Cycle Coolant System. Complete Electrical Controls. 1 HP DC Servo Feed Motor.
    Ball Screw Driven Drill Feed. Eldorado F18 "Mega Flo" High Pressure Coolant System With Filtration And Heat Exchanger. Ball Screw Driven Headstock Feed System. Thumbwheel Feed Rate. Feed Thrust Load Meter. Chip Box. Automatic Slideway Lubrication. Spindle Load Meter. Megaflo Flo-Minder. 6" 6-Jaw Chuck. Whip Guide.